StormPROOF Treatment Systems2017-08-03T15:46:57+00:00

StormPROOF Treatment Systems

stormwater treatment systems

Storm Water Systems uses a three-phased approach to meet your treatment needs: 

  • Phase 1: Mechanical – In this initial phase, we treat storm water with a series of coarse and fine filters to dramatically lessen solids down to very low amounts.
  • Phase 2: Enhanced – The next phase involves the use of settling tanks and media to further lessen solids and metals.
  • Phase 3: Polished – The last phase involves the removal of dissolved metals to offer an extra level of polish to the water. This phase will be especially important with complying with the anticipated TMDLs on impaired bodies of water from the Water Board.

Water Flow Capacity is NOT an issue

StormPROOF™ is designed to operate at 100, 250, 500 and 1,000 gallons per minute (gpm).  Systems with even larger flow rates can also be easily designed.


As California’s leading provider of Advanced BMPs for storm water management and compliance, we can help you write your legally required action plan, then implement it.